Honda 954 Service Manual page 349

HANDLEBAR WEIGHT REPLACEMENT
Remove the grip rubber f r o m the handlebar.
Straighten the weight retainer tab b y the screwdriver
or punch.
Temporarily install the handlebar weight and screw,
Apply iubncant
through rhe then remove the inner weight by turning the handle-
tab
bar weight.
the rubber for
easy removal
Remove the handlebar weight f r o m the inner weight.
Discard the retainer.
Install the new retainer onto the inner weight.
Install the handlebar weight onto the inner weight,
aligning the bosses and grooves each other.
Install a new mounting screw.
Insert t h e handlebar w e i g h t assembly i n t o t h e
handlebar.
Turn the handlebar weight and hook the retainer tab
w i t h the hole in the handlebar.
the clean surfaces of the left handlebar and throttle
grip.
-
Wait 3
Rotate the grip for even application of the adhesive
the
adhesive to
dry
for approximately
1 hour before
using
A to the inside c the grip and to
5 minutes and install the grip.
FRONT WHEEL/SUSPENSION/STEERlNG
RUBBER
CUSHION
HANDLEBAR WElG HT
INNER WEIGHT
RETAINER RING
13-7