Honda 954 Service Manual page 234

7. ENGINE RE OVAL/INSTALLATION
SE RVl CE IN FORMATION
LOWER BRACKET REMOVAL
ENGINE REMOVAL
SERVICE INFORMATION
GENERAL
During engine removal and installation, support the motorcycle using a hoist or equivalent.
Support the engine using a jack or other adjustable support t o ease of engine hanger bolts removal.
oil
Do not use the filter as a jacking point.
The following components can be serviced w i t h the engine installed i n the frame.
-
Alternator (Section 10)
-
Camshaft (Section 8)
-
Clutch (Section 9)
-
Gearshift linkage (Section 9)
-
Oil cooler (Section 4)
-
Oil p u m p (Section 4)
-
Shift forksishift drum (Section 9)
-
Water p u m p (Section 6)
Engine dry weight
Coolant capacity
Engine oil capacity
TORQUE VALUES
Lower bracket mounting nut, 10 mm
Lower bracket mounting pinch bolt
Engine hanger bolt (front)
Engine hanger bolt (middle)
Engine hanger nut (rear)
Rear engine hanger pinch bolt
Swingarm pivot nut
Side stand bracket bolt
Drive sprocket special bolt
TOOL
Rod holder, 24 x 27 mm
7-1
7 -2
7-3
Radiator and engine
At disassembly
42 N * m (4.3 kgf-m, 31 IbfW
26 N * m (2.7 kgf-m, 20 Ibf-ft)
39 N * m (4.0 kgf-m, 29 Ibfsft)
54 N - m (5.5 kgf-m, 40 IbfW
54 N * m (5.5 kgf-m, 40 Ibf-ft)
26 N - m (2.7 kgf-m, 20 Ibf-ft)
118 N * m (12.0 kgf-m, 87 Ibf*ft)
26 (2.7 kgf-m, 20 Ibf*ft)
44 N * m (4.5 kgf-m, 33 Ibf-ft)
54 N - m (5.5 kgf-m, 40 Ibf-ft)
ENGINE INSTALLATION
LOWER BRACKET INSTALLATION
SPECIFICATIONS
61.2 kg (134.9 Ibs)
US
3.1 liter (3.3
US
4.0 liter (4.2
U-nut, see page 7-12
See page 7-7
ALOC bolt
7-7
7-12
qt, 2.7 Imp
qt, 3.5 Imp qt)
7-1