Honda 954 Service Manual page 424

BRAKE
HYDRAULIC
Coat all parts w i t h clean brake fluid before assembly.
Keep the piston
cups spring, snap
ring and boo? as a
set, do not substi-
tute individual
parts
Dip the piston i n brake fluid.
When instaiiing
Install the spring t o the primary cup.
the P do no?
U S ,
C
Install the springiprimary cup and master piston
Apply silicone grease to the piston contact area of the
push rod.
Install the push rod into the master cylinder.
if the push rod is
disassembled,
refer to page 3-26
for push rod
length adjust-
ment
Install the snap ring.
snap ring is
seated in the
Snap ring
Install the boot.
Apply brake fluid to a new- O-ring and install it onto
the reservoir joint.
Install the reservoir joint into the master cylinder.
Apply a locking agent t o the reservoir joint screw
threads.
Install and tighten the screw t o the specified torque.
TORQUE:
15-20
pliers 0791 4-SA50000
1
MASTER PISTON
ASSEMBLY
RESERVOIR JOINT