Honda 954 Service Manual page 102

LUBRICATION SYSTEM
Remove the
DISASSEMBLY
Remove the dowel pins.
Remove the oil pump assembly bolt and
cover.
Remove the thrust washer, drive pin, oil p u m p shaft,
outer rotor and inner rotor from the oil p u m p body.
INSPECTION
Temporarily install the oil p u m p shaft.
Install the outer and inner rotors into the oil p u m p
body.
Measure the
SERVICE LIMIT:
4-6
and oil
three flai
clearance.
tip
0.20 mm (0.008 in)
DOWEL PINS
oil
p u m p
INNER ROTOR
DRIVE PI
ASS E M B LY BOLT
\
OIL PUMP COVER
OUTER ROTOR
WASHER