Honda 954 Service Manual page 325

Tighten the 6 mm bolts securely.
Tighten the 10 mm bolt, and then 8 mm bolts to the
specified torque.
TORQUE:
The sealing wash-
ers and
er locations are
indicated on the
Tighten the 8 mm bolts t o the specified torque.
using the "A
TORQUE: 25 N*m (2.5 kgf*m, 18 I b f W
Tighten the 6 mm bolts securely.
25 N*m (2.5 kgf*m, 18 Ibf.ft)
8 mm bolt:
6 mm bolt.
CRAN KCASE/PISTON/CY Ll NDER
6 mm BOLTS
\
8 mm BOLTS
6 mm BOLTS/
I
8 mm BOLTS/ SEALING WASHERS
SEALING WASHERS
6 mm BOLT