Honda 954 Service Manual page 158

FUEL SYSTEM (Programmed Fuel Injection)
PGM-FI MIL 34 BLINKS (EGCV AND AIR INTAKE VALVE SERVO MOTOR VOLTAGE)
Turn the ignition switch t o "OFF".
Disconnect the servo motor 6P connector.
Check for loose or poor contact o n the servo
motor 6P connector.
Connect the servo motor 6P connector.
Place the motorcycle o n its side stand.
Turn the ignition switch t o "ON" and check that
the MIL blinks.
Turn the ignition switch t o "OFF" and the
engine stop switch t o "OFF".
Disconnect the servo motor 6P connector.
Measure the resistance at the servo motor 6P
connector terminals.
Connection: Yellow/Red
Standard: 5 kR (20°C/68"F)
5-50
34 blinks
-
Normal
Loose or poor contact on the servo motor 6P con-
Abnormal
Faulty servo motor