Loosen the lower bracket rear pinch bolt.
Remove the lower bracket rear socket bolt and nut,
then remove the lower bracket f r o m the engine.
VAL
Drain the engine oil (page 3-15).
Drain the coolant (page 6-41.
Remove the following:
- Fuel tank (page 5-59)
- EGCV and air intake valve servo motor (page 5-95)
- Throttle body (page 5-67)
- Lower bracket (page 7-2)
- PAIR control solenoid valve assembly (page 5-88)
- Ignition coil/spark plug sub-harness
Disconnect the speed sensor
and engine sub-harness 2P (Blue) connector
(Natural) connector
3P
ENGINE REMQVAL/I NSTALLATION
CONNECTOR
7-3