Honda 954 Service Manual page 293

install the oil Install the clutch outer guide, and then install the
pump driveidriven sprocket and drive chain as an
sprocket with
its
"OUT" mark fac-
ing out
Apply a locking agent t o the threads of the oil p u m p
driven sprocket bolt.
Tighten the driven sprocket bolt t o the specified
torque.
TORQUE: 15 N-m (1.5 k g f m , 11 Ibf-ft)
Align the primary drive gear and sub-gear teeth w i t h
Be sure the clutch
outer sits securely
a screwdriver as shown.
onto the position-
ing tabs of the oii
Install the clutch outer.
pump drive
sprocket. Rotate
the oil pump drive
chain while
properly seat it.
Install the washer onto the clutch outer.
9-10
oil
PRIMARY DRIVE GEAR/SUB-GEAR