Install the fork bolt to the fork slider.
Tighten the fork
bolt after
the fork shder
into
the fork bridges
Install the handlebar stopper ring.
Install the pre-load adjuster and stop ring.
I NSTALLATlO N
Install the fork leg through the bottom bridge, handle-
bar and t o p bridge (page
Position the top end of the fork pipe flush w i t h the
upper surface of the top bridge as shown.
Tighten the bottom bridge pinch bolts t o the specified
torque.
TORQUE: 26 N*m (2.7
FRONT WHEEL/SUSPENSlON/STEERlNG
20
PRE-LOAD ADJUSTER
TOP BRIDGE
FORK SLIDER
FORK BOLT
STOP RING