Honda 954 Service Manual page 294

Install the clutch center.
Install the thrust washer.
Install the lock washer with its "OUT" mark facing
out.
Apply oil t o the new lock nut threads, then install it.
Hold the clutch center with the clutch center holder,
then tighten the lock nut t o the specified torque.
TOOL:
Clutch center holder
T O R QUE: 127 N-m (13.0 kgf-m. 94 I b f W
Stake the lock nut into the mainshaft groove with a
Be carefui not to
punch.
damage the main-
shaft threads.
Install the judder spring seat'and judder spring.
Coat the clutch discs and plates with clean engine oil.
Install the large I.D. clutch disc.
Stack the clutch plates and discs alternately.
07724-0050002
(Equivalent commer-
cially available in
GREEN JUDDER SPRING
COLORED
CLUTCH PLATES - - -