REAR FENDER
REAR FENDER A REMOVAL/
INSTALLATION
Remove the rear cowl (page 2-2).
Disconnect the turn signal light connectors and
license light connector.
Remove the nuts, set plates and turn signal lights.
Remove the nut and reflector, then remove rea
fender A.
Installation is i n the reverse order of removal.
REAR FENDER REMOVAL
Remove the following:
- Rear cowl (page 2-2)
-
Battery (page 16-4)
- ECM (page 5-87)
Unhook the retaining tab and remove the fuse box.
Remove the starter relay switch and fuel cut-off relay
from the rear fender.
Disconnect the alternator 3P (White) connector and
regulator/rectifier 6P (Natural) connector.
FRAME/BODY PANELS/EXHAUST SYSTEM
CON N ECTORS
I
( NATURA L) CONNECTOR
2-9