Honda 954 Service Manual page 94

Turn the rebound adjuster clockwise until
then turn the adjuster counterclockwise.
REBOUND ADJUSTER STANDARD POSITION:
2 turns from full
BOLTS, FASTE
UT
Check that all chassis nuts and bolts are tightened t o
their correct torque values (page 1-12).
Check that all safety clips, hose clamps and cable
stays are in place and properly secured.
The pressure should be checked when the tires are
cold.
RECOMMENDED TIRE PRESSURE AND TIRE SIZE:
Tire pressure
Tire size
Bridgestone
Tire
Check the tires for cuts, embedded nails, or other
damage.
Check the front and rear wheels for trueness (refer t o
section 13 and 14).
Measure the tread depth at the center of the tires.
Replace the tires when the tread depth reaches the
following limits.
MINIMUM TREAD DEPTH:
FRONT: 1.5
REAR: 2.0
hard
FRONT
250 (2.50, 36) 290 (2.90, 42)
M/C
Pilot SPORT E Pilot SPORT E
m m
(0.06
(0.08 in)
stops,
it
REAR
MAINTENANCE
3-31