Honda 954 Service Manual page 422

HYDRAULIC BRAKE
Remove and discard the brake pedal joint cotter pin.
Remove the joint pin.
Remove the master cylinder mounting bolts, collars
(California type only), step guard and master cylinder.
DISASSEMBLY
Remove the screw and reservoir hose joint from the
master cylinder.
Remove the boot.
Remove the snap ring from the master cylinder body
using the special tool as shown.
TOOL:
Snap ring pliers
Remove the push roc, master piston and spring.
Clean the inside of the cylinder with brake fluid.
15-18
0791
RESERVOIR JOINT
SNAP RING PLIERS BOOT