Honda 954 Service Manual page 232

Route the overflow hose properly (page 1-29).
Install and tighten the reserve tank upper mounting
bolt.
Install and tighten the lower mounting bolt.
Connect the siphon hose to the reserve tank
Install the removed parts in the reverse
removal.
CONTROL RELAY
INSPECTION
Remove the rear cowl (page 2-21.
Disconnect the fan control relay connector.
Remove the fan control relay.
Connect the ohmmeter t o the fan control relay con-
nector terminals.
CONNECTION: Green/Yellow
Connect the 12V battery t o the following fan control
relay connector terminals.
CONNECTION: Red/Green
There should be continuity only when 12V battery is
connected.
If there is no continuity when the 12V battery is con-
nected, replace the fan control relay.
of
order
-
-
COOLING SYSTEM
FA
FAN CONTROL RELAY
I
I
BATTERY
I
6-17