ENGINE REMOVALANSTALLATION
Install the lower bracket onto the engine.
Temporarily install the front and rear 10 mm bolts and
nuts.
Temporarily tighten the 10 mm nuts.
Install the swingarm (page 14-23).
Hold the swingarm pivot bolt using the special tool,
then tighten the pivot nut t o the specified torque.
TOOL
Rod holder, 24 x 27 m m
TORQUE: 118 N*m (12.0 kgf-m, 87 Ibf-ft)
Tighten
torque.
TORQUE:
P I N CH 'Bo L T S
26 N - m (2.7 kgf-m, 20 I b f W
the
swingarm pivot pinch bolt t o the specified
26 M-m (2.7 kgf-m, 20 Ibf-ft)
\