Show Rfdetect Clients - Nortel 2300 Series Reference

530 RF Detection Commands
• set rfdetect black-list on page 515

show rfdetect clients

Displays the wireless clients detected by a WSS.
Syntax
show rfdetect clients [mac mac-addr]
mac mac-addr
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command shows information about all wireless clients detected by a WSS's APs:
WSS
# show rfdetect clients
Total number of entries: 30
Client MAC Client
Vendor
----------------- ------------------------ ------- ------------- ------------------ ------- -----
00:03:7f:bf:16:70 Unknown
00:04:23:77:e6:e5 Intel
00:05:5d:79:ce:0f D-Link
00:05:5d:7e:96:a7 D-Link
00:05:5d:7e:96:ce D-Link
00:05:5d:84:d1:c5 D-Link
The following command displays more details about a specific client:
WSS# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: Nortel, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most recent 802.11 packet
detected from the client.
Table 77 and Table 78 describe the fields in these displays.
Field
Client MAC
Client Vendor
AP MAC
NN47250-100 (Version 02.51)
Displays detailed information for a specific client.
AP MAC AP Port/Radio NoL Type Last
Vendor /Channel
Unknown ap 1/1/6
Unknown ap 1/1/2
Unknown ap 1/1/149 1 intfr 87
Unknown ap 1/1/149 1 intfr 117
Unknown ap 1/1/157 1 intfr 162
Unknown ap 1/1/1
Table 1: show rfdetect clients Output
Description
MAC address of the client.
Company that manufactures or sells the client.
MAC address of the radio with which the rogue client is
associated.
seen
1 intfr 207
1 intfr 155
1 intfr 52