Set Rfdetect Ignore; Set Rfdetect Black-List - Nortel 2300 Series Reference

Examples The following command adds MAC address aa:bb:cc:44:55:66 to the attack list:
WSS# set rfdetect attack-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now in attacklist.
See Also
• clear rfdetect attack-list on page 512
• show rfdetect attack-list on page 519
• set radio-profile countermeasures on page 287

set rfdetect black-list

Adds an entry to the client black list. The client black list specifies clients that are not allowed on the network. WSS
Software drops all packets from the clients on the black list.
Syntax
set rfdetect black-list mac-addr
mac-addr
Defaults The client black list is empty by default.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Usage In addition to manually configured entries, the list can contain entries added by WSS Software. WSS
Software can place a client in the black list due to an association, reassociation or disassociation flood from the
client.
The client black list applies only to the WSS on which the list is configured. WSSs do not share client black lists.
Examples The following command adds client MAC address 11:22:33:44:55:66 to the black list:
WSS# set rfdetect black-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now blacklisted.
See Also
• set rfdetect black-list on page 515
• show rfdetect black-list on page 519

set rfdetect ignore

Configures a list of known devices to ignore during an RF scan. WSS Software does not generate log messages or traps
for the devices in the ignore list.
Syntax
set rfdetect ignore mac-addr
mac-addr
MAC address you want to place on the black list.
BSSID (MAC address) of the device to ignore.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
RF Detection Commands 525