Nortel 2300 Series Reference page 607

Examples To display the currently active boot profile, type the following command at the boot
prompt:
boot> show
BOOT Index: 0
BOOT TYPE: c
DEVICE:
FILENAME:
FLAGS:
OPTIONS:
The following is an example of a boot profile from a 2350 that is booted with a software image downloaded
from a TFTP server. In the example, when the 2350 boots, it downloads a system image file called bootfile
located on a TFTP server with address 172.16.0.1.
boot> show
BOOT Index: 0
BOOT TYPE: n
DEVICE:
FILENAME:
HOST IP:
LOCAL IP:
GATEWAY IP: 172.16.0.20
IP MASK:
FLAGS:
OPTIONS:
Table 89 describes the fields in the display.
Field
BOOT Index
BOOT TYPE
boot1:
default
00000000
run=nos;boot=0
emac1
bootfile
172.16.0.1
172.16.0.21
255.255.255.0
00000000
run=nos
Table 1: Output for show
Description
Boot profile slot, which can be a number from 0 to 3.
Boot type:
• c—Compact flash. Boots using nonvolatile
storage or a flash card.
• n—Network. Boots using a TFTP server.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Boot Prompt Commands 607