Nortel 2300 Series Reference page 240

240 Network Domain Commands
Syntax
show network-domain
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.1.
Examples To display Network Domain status, type the following command. The output of the command
differs based on whether the WSS is a member of a Network Domain or a Network Domain seed.
On a WSS that is a Network Domain member, the following output is displayed:
WSS# show network-domain
Member Network Domain name: California
Member
---------------
10.8.107.1
On a WSS that is a Network Domain seed, information is displayed about the Network Domains of which the WSS is a
member, as well as Network Domain seeds with which the WSS has a peer relationship. For example:
WSS# show network-domain
Network Domain name: California
Peer
---------------
10.8.107.1
Member
---------------
10.1.0.0
Member Network Domain name:
Member
---------------
10.8.107.1
10.1.0.0
Table 33 describes the fields in the display.
Field
WSS
Output if
Network Domain name
Peer
State
Member
NN47250-100 (Version 02.51)
State Mode
------------- ------ ---------------
UP SEED
State
-------------
UP
State Mode
------------- ------ ---------------
DOWN SEED
State Mode
------------- ------ ---------------
UP MEMBER
DOWN SEED
Table 1: show network-domain Output
Description
is the Network Domain seed:
Name of the Network Domain for which the WSS is a seed.
IP addresses of the other seeds in the Network Domain.
State of the connection between the WSS and the peer Network
Domain seeds:
• UP
• DOWN
IP addresses of the seed WSS and members in the Network
Domain
Mobility-Domain
default
Mobility-Domain
Mobility-Domain
default