Set Radio-Profile Service-Profile - Nortel 2300 Series Reference

308 AP Commands

set radio-profile service-profile

Maps a service profile to a radio profile. All radios that use the radio profile also use the parameter settings,
including SSID and encryption settings, in the service profile.
Syntax
set radio-profile name service-profile name
radio-profile name
service-profile name
Defaults A radio profile does not have a service profile associated with it by default. In this case,
the radios in the radio profile use the default settings for parameters controlled by the service profile.
Table 38 lists the parameters controlled by a service profile and their default values.
Table 5: Defaults for Service Profile Parameters
Parameter
attr
auth-dot1x
auth-fallthru
auth-psk
beacon
cac-mode
cac-session
NN47250-100 (Version 02.51)
Radio profile name of up to 16 alphanumeric characters, with no spaces.
Service profile name of up to 16 alphanumeric characters, with no spaces.
Default Value
No attributes configured Does not assign the SSID's
enable
none
disable
enable
none
14
Radio Behavior When
Parameter Set To
Default Value
authorization attribute values to
SSID users, even if attributes are
not otherwise assigned.
When the Wi-Fi Protected Access
(WPA) information element (IE)
is enabled, uses 802.1X to
authenticate WPA clients.
Denies access to users who do not
match an 802.1X or MAC
authentication rule for the SSID
requested by the user.
Does not support using a
preshared key (PSK) to
authenticate WPA clients.
Sends beacons to advertise the
SSID managed by the service
profile.
Does not limit the number of
active user sessions based on Call
Admission Control (CAC).
If session-based CAC is enabled
(cac-mode is set to session),
limits the number of active user
sessions on a radio to 14.