Examples The following command configures service profile sp2 to use CCMP encryption:
WSS# set service-profile sp2 cipher-ccmp enable
success: change accepted.
See Also
•
set service-profile cipher-tkip on page 313
•
set service-profile cipher-wep104 on page 314
•
set service-profile cipher-wep40 on page 315
•
set service-profile wpa-ie on page 342
•
show service-profile on page 380
set service-profile cipher-tkip
Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in a service profile.
Syntax
set service-profile name cipher-tkip {enable | disable}
name
enable
disable
Defaults When the WPA IE is enabled, TKIP encryption is enabled by default.
Access Enabled.
History Introduced in WSS Software Version 3.0.
Usage To use TKIP, you must also enable the WPA IE.
Examples The following command disables TKIP encryption in service profile sp2:
WSS# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
•
set service-profile cipher-ccmp on page 312
•
set service-profile cipher-wep104 on page 314
•
set service-profile cipher-wep40 on page 315
•
set service-profile tkip-mc-time on page 333
•
set service-profile wpa-ie on page 342
•
show service-profile on page 380
Service profile name.
Enables TKIP encryption for WPA clients.
Disables TKIP encryption for WPA clients.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
AP Commands 323