Clear Ap Image - Nortel 2300 Series Reference

AP Local Switching
WLAN Mesh Services
AirDefense Integration

clear ap image

Clears an AirDefense sensor software image file from an AP's configuration.
Syntax
clear ap ap-number image
ap ap-number
Defaults None.
Access Enabled.
show ap config on page 344
show ap status on page 358
show ap counters on page 348
show ap global on page 373
show ap connection on page 371
show ap unconfigured on page 374
show ap qos-stats on page 354
show ap etherstats on page 355
set ap local-switching mode on page 260
set ap local-switching vlan-profile on page 260
clear ap image on page 237
show ap arp on page 343
show ap fdb on page 353
show ap vlan on page 365
set ap boot-configuration mesh mode on page 252
sset ap boot-configuration mesh psk-phrase on page 252
set ap boot-configuration mesh ssid on page 254
set service-profile mesh on page 320
set service-profile bridging on page 310
show ap boot-configuration on page 370
show ap mesh-links on page 357
set ap image on page 259
clear ap image on page 237
Index value that identifies the AP to the WSS.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
AP Commands 247