Set Service-Profile Web-Portal-Session-Timeout - Nortel 2300 Series Reference

set service-profile web-portal-logout
Changes the web portal logout mode.
Syntax
set service-profile name web-portal-logout mode {enable | disable}
name
mode
Access Enabled.
History Introduced in WSS Software Version 6.0.
Examples The following command allows the web portal service to enable the web portal logout
functionality.
WSS# set service-profile sp1 web-portal-logout mode enable
success: change accepted.
set service-profile web-portal-logout logout-url
The URL should be of the form https://host/logout.html.
name
mode
Defaults By default, the logout URL uses the IP address of the WSS as the host part of the URL.
The host can be either an IP address or a hostname.
Access Enabled.
History Introduced in WSS Software Version 6.0.
Usage Specifying the logout URL is useful if you want to standardize it across your network.
Examples You can configure the logout URL on all of the WSS in the Mobility Domain as https:/
/host/logout.html.
WSS# set service-profile spl web-portal-logout logout-url
success: change accepted.

set service-profile web-portal-session-timeout

Changes the number of seconds WSS Software allows Web Portal Web-based AAA sessions to remain in the
Deassociated state before being terminated automatically.
Service profile name.
To enable or disable web portal logout.
Service profile name.
To enable or disable web portal logout.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
AP Commands 349
https://host/logout.html