Clear Port Counters - Nortel 2300 Series Reference

34 Port Commands
Statistics
clear ap
Caution!
AP.
Removes a AP.
Syntax
clear ap ap-num
ap-num
Defaults None.
Access Enabled.
Examples The following command clears AP 1:
WSS# clear ap 1
This will clear specified AP devices. Would you like to continue? (y/n) [n]y
See Also
• set ap on page 33
• set port type ap on page 41

clear port counters

Clears port statistics counters and resets them to 0.
Syntax
clear port counters
Defaults None.
Access Enabled.
Examples The following command clears all port statistics counters and resets them to 0:
WSS# clear port counters
success: cleared port counters
NN47250-100 (Version 02.51)
show port mirror on page 49
clear port mirror on page 26
show port counters on page 46
monitor port counters on page 28
clear port counters on page 24
When you clear a AP, WSS Software ends user sessions that are using the
Number of the AP(s) you want to remove.