WSS# show security acl hits
ACL hit counters
Index Counter
----- -------------------- -----------
1
2
3
See Also
•
show security acl hits on page 462
•
show security acl info on page 463
show security acl
Displays a summary of the security ACLs that are mapped.
Syntax
show security acl
Defaults None.
Access Enabled.
Usage This command lists only the ACLs that have been mapped to something (a user, or VLAN, or port,
and so on). To list all committed ACLs, use the show security acl info command. To list ACLs that have not
yet been committed, use the show security acl editbuffer command.
Examples To display a summary of the mapped security ACLs on a WSS, type the following command:
WSS# show security acl
ACL table
ACL
---------------------------- ---- ------ -------
acl_123
acl_133
acl_124
See Also
•
clear security acl on page 449
•
commit security acl on page 452
•
set security acl on page 454
•
show security acl editbuffer on page 462
•
show security acl info on page 463
show security acl dscp
This command has been renamed in WSS Software Version 4.1. See show qos dscp-table on page 96.
ACL-name
0 acl_2
0 acl_175
916 acl_153
Type Class Mapping
IP
Static Port 2 In
IP
Static Port 4 In
IP
Static
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Security ACL Commands 471