Nortel 2300 Series Reference page 254
Wlan security switch command line reference
Hide thumbs
Also See for 2300 Series:
- Configuration manual (658 pages) ,
- Solution manual (108 pages) ,
- Installation and configuration manual (66 pages)
Table of Contents
Advertisement
254 AP Commands
soda failure-page
soda remediation-acl
soda success-page
soda logout-page
Defaults None.
Access Enabled.
History
Version 4.1
Usage If the service profile is mapped to a radio profile, you must remove it from the radio profile
first. (After disabling all radios that use the radio profile, use the clear radio-profile name service-
profile name command.)
Examples The following commands disable the radios that are using radio profile rp6, remove
service-profile svcprof6 from rp6, then clear svcprof6 from the configuration.
WSS# set radio-profile rp6 mode disable
WSS# clear radio-profile rp6 service-profile svcprof6
success: change accepted.
WSS# clear service-profile svcprof6
success: change accepted.
•
clear radio-profile on page 242
•
set radio-profile mode on page 291
•
show service-profile on page 380
NN47250-100 (Version 02.51)
Resets the page that is loaded when a client fails the
checks performed by the SODA agent. By default, the
page is generated dynamically.
Disables use of the specified remediation ACL for the
service profile. When no remediation ACL is specified, a
client is disconnected form the network when it fails
SODA agent checks.
Resets the page that is loaded when a client passes the
checks performed by the SODA agent. By default, the
page is generated dynamically.
Resets the page that is loaded when a client logs out of
the network. By default, the client is disconnected from
the network without a page being loaded.
Options added to clear SODA parameters.
Advertisement
Table of Contents
