Set Authentication Mac - Nortel 2300 Series Reference

• set service-profile auth-fallthru on page 308
• show aaa on page 210
set authentication last-resort
Deprecated in WSS Software Version 5.0. The last-resort user is not required or supported in WSS Software
Version 5.0. Instead, a user who accesses the network on an SSID by using the fallthru access type last-resort
is automatically a last-resort user. The authorization attributes assigned to the user come from the default
authorization attributes set on the SSID.

set authentication mac

Configures authentication and defines where it is performed for specified non-802.1X users with network
access through a media access control (MAC) address.
Syntax
set authentication mac {ssid ssid-name | wired} mac-addr-
[method2] [method3] [method4]
ssid ssid-name
wired
mac-addr-wildcard
method1
method2
method3
method4
Defaults By default, authentication is deactivated for all MAC users, which means MAC address
authentication fails by default. When using RADIUS for authentication, the default well-known
password for MAC and last-resort users is nortel.
Access Enabled.
SSID name to which this authentication rule applies. To apply the rule to
all SSIDs, type any.
Applies this authentication rule specifically to users connected to a wired
authentication port.
A single user or set of users with access via a MAC address. Specify a
MAC address, or use the wildcard (*) character to specify a set of MAC
addresses. (For details, see
At least one of up to four methods that WSS Software uses to handle
authentication. Specify one or more of the following methods in priority
order. WSS Software applies multiple methods in the order you enter
them.
A method can be one of the following:
• local—Uses the local database of usernames and user
groups on the WSS for authentication.
• server-group-name—Uses the defined group of
RADIUS servers for authentication. You can enter up to
four names of existing RADIUS server groups as
methods.
For more information, see "Usage."
Nortel WLAN—Security Switch 2300 Series Command Line Reference
"MAC Address Wildcards" on page
AAA Commands 199
method1
wildcard
13.)