Nortel 2300 Series Reference page 537

History
Version 3.0
Version 4.0
Usage This command is valid only on the seed switch of the Mobility Domain. To display rogue
information for an individual switch, use the show rfdetect data command on that switch.
Examples The following command displays summary information for all SSIDs and BSSIDs
detected in the Mobility Domain:
WSS# show rfdetect mobility-domain
Total number of entries: 194
Flags: i = infrastructure, a = ad-hoc, u = unresolved
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID Vendor
----------------- ------------ ----- ------ --------------------------------
00:07:50:d5:cc:91 Cisco intfr i----w r27-cisco1200-2
00:07:50:d5:dc:78 Cisco intfr i----w r116-cisco1200-2
00:09:b7:7b:8a:54 Cisco intfr i-----
00:0a:5e:4b:4a:c0 3Com intfr i----- public
00:0a:5e:4b:4a:c2 3Com intfr i----w nrtlwlan
00:0a:5e:4b:4a:c4 3Com intfr ic---- nrtl-ccmp
00:0a:5e:4b:4a:c6 3Com intfr i----w nrtl-tkip
00:0a:5e:4b:4a:c8 3Com intfr i----w nrtl-voip
00:0a:5e:4b:4a:ca 3Com intfr i----- nrtl-webaaa
...
The lines in this display are compiled from data from multiple listeners (AP radios). If an item has the value
unresolved, not all listeners agree on the value for that item. Generally, an unresolved state occurs only when
an AP or a Mobility Domain is still coming up, and lasts only briefly.
The following command displays detailed information for rogues using SSID nrtl-webaaa.
WSS# show rfdetect mobility-domain ssid nrtl-webaaa
BSSID: 00:0a:5e:4b:4a:ca Vendor: 3Com SSID:
Type: intfr Adhoc: no Crypto-types: clear
WSS-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/1/11 Mac: 00:0b:0e:00:0a:6a
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -85 SSID:
BSSID: 00:0b:0e:00:7a:8a Vendor: Nortel SSID: nrtl-webaaa
Type: intfr Adhoc: no Crypto-types: clear
WSS-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/1/1 Mac: 00:0b:0e:00:0a:6a
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -75 SSID:
WSS-IPaddress: 10.3.8.103 Port/Radio/Ch: ap 1/1/1 Mac: 00:0b:0e:76:56:82
Command introduced.
• bssid and ssid options added.
• Vendor, Type, and Flags fields added.
Type Flags SSID
-webaaa
nrtl
-webaaa
nrtl
Nortel WLAN—Security Switch 2300 Series Command Line Reference
RF Detection Commands 537
-webaaa
nrtl