Nortel 2300 Series Reference page 466

Wlan security switch command line reference
Hide thumbs Also See for 2300 Series:
Table of Contents

Advertisement

466 Security ACL Commands
protocol
source-ip-addr mask
| any
operator port [port2]
destination-ip-addr mask |
any
type icmp-type
code icmp-code
NN47250-100 (Version 02.51)
IP protocol by which to filter packets:
• ip
• tcp
• udp
• icmp
• A protocol number between 0 and 255.
(For a complete list of IP protocol names and numbers, see
www.iana.org/assignments/protocol-numbers.)
IP address and wildcard mask of the network or host from which the
packet is being sent. Specify both address and mask in dotted
decimal notation. For more information, see
page
12.
To match on any address, specify any or 0.0.0.0 255.255.255.255.
Operand and port number(s) for matching TCP or UDP packets to
the number of the source or destination port on source-ip-addr or
destination-ip-addr. Specify one of the following operands and the
associated port:
• eq—Packets are filtered for only port number.
• gt—Packets are filtered for all ports that are greater
than port number.
• lt—Packets are filtered for all ports that are less
than port number.
• neq—Packets are filtered for all ports except port
number.
• range—Packets are filtered for ports in the range
between port and port2. To specify a port range,
enter two port numbers. Enter the lower port
number first, followed by the higher port number.
(For a complete list of TCP and UDP port numbers, see
www.iana.org/assignments/port-numbers.)
IP address and wildcard mask of the network or host to which the
packet is being sent. Specify both address and mask in dotted
decimal notation. For more information, see
page
12.
To match on any address, specify any or 0.0.0.0 255.255.255.255.
Filters ICMP messages by type. Specify a value from 0 through
255. (For a list of ICMP message type and code numbers, see
www.iana.org/assignments/icmp-parameters.)
For ICMP messages filtered by type, additionally filters ICMP
messages by code. Specify a value from 0 through 255. (For a list of
ICMP message type and code numbers, see
assignments/icmp-parameters.)
"Wildcard Masks" on
"Wildcard Masks" on
www.iana.org/

Advertisement

Table of Contents
loading

Table of Contents