380 AP Commands
show ap boot-configuration
Displays information about the static IP address configuration (if any) on a AP.
Syntax
show ap boot-configuration ap-num
ap-num
Defaults None.
Access
Enabled.
History
Version 4.1
Version 6.0
Examples The following command displays static IP configuration information for AP 1:
WSS# show ap boot-configuration 1
Flags: 0
AP: 1
IP Address:
VLAN Tag:
Switch:
Mesh:
IP Address:
Netmask:
Gateway:
VLAN Tag:
Switch IP:
Switch Name:
DNS IP:
Mesh SSID:
Mesh PSK:
Table 44
describes the fields in this display.
Field
AP
VLAN Tag
NN47250-100 (Version 02.51)
Index value that identifies the AP on WSS.
Command introduced in WSS Software.
Option dap removed.
Field Mesh added
Field Mesh SSID added
Field Mesh PSK added
Disabled
Disabled
Disabled
Disabled
Table 18: Output for show ap boot-configuration
Description
AP number.
The VLAN tag that the AP is configured to use (if any).