Set Ap Group - Nortel 2300 Series Reference
Wlan security switch command line reference
Hide thumbs
Also See for 2300 Series:
- Configuration manual (658 pages) ,
- Solution manual (108 pages) ,
- Installation and configuration manual (66 pages)
Table of Contents
Advertisement
268 AP Commands
ap auto
force-image-
download enable
force-image-
download disable
Defaults Forced image download is disabled by default.
Access Enabled.
History Introduced in WSS Software 5.0.
Optional dap removed 6.0.
Usage A change to the forced image download option takes place the next time the AP is restarted.
Even when forced image download is disabled (the default), the AP still checks with the WSS to verify that the
AP has the latest image, and to verify that the
The AP loads its local image only if the
a newer AP image than the one in the AP's local storage. If the switch is not running WSS Software Version
5.0 or later, or the
loads its image from the
Examples The following command enables forced image download on AP 69:
WSS# set ap 69 force-image-download enable
success: change accepted.
See Also
show ap config on page 344
set ap group
Configures a named group of APs. WSS Software automatically load balances sessions among the access points in a
group. To balance the sessions, WSS Software rejects an association request for an access point's radio if that radio has
at least four more active sessions than the radio of the same type with the least number of active sessions within the
group.
Syntax
set {ap port-list | ap {ap-num | auto}} group name
ap port-list
ap ap-num
ap auto
name
Defaults APs are not grouped by default.
Access Enabled.
NN47250-100 (Version 02.51)
Configures forced image download for the AP configuration profile. (See
set ap auto on page 245.)
Enables forced image download.
Disables forced image download.
WSS
WSS
has a newer version of the AP image than the version in the AP's local storage, the AP
WSS
.
List of AP access ports to add to the group.
Number of a AP to add to the group.
Configures an AP group for the AP configuration profile. (See set ap
auto on page 245.)
AP group name of up to 16 alphanumeric characters, with no spaces.
WSS
is running WSS Software Version 5.0 or later.
is running WSS Software Version 5.0 or later and does not have
Advertisement
Table of Contents
