Set Snmp Community - Nortel 2300 Series Reference

See Also
• clear ntp server on page 102
• clear ntp update-interval on page 103
• set ntp on page 121
• set ntp server on page 122
• show ntp on page 156

set snmp community

Configures a community string for SNMPv1 or SNMPv2c.
Note.
For SNMPv3, use the set snmp usm command to configure an SNMPv3 user.
SNMPv3 does not use community strings.
Syntax
set snmp community name comm-string
access {read-only | read-notify | notify-only | read-write | notify-read-write}
comm-string
read-only
read-notify
notify-only
read-write
notify-read-write
Defaults None.
Access Enabled.
Name of the SNMP community. Specify between 1 and 32
alphanumeric characters, with no spaces.
Allows an SNMP management application using the string to get
(read) object values on the switch but not to set (write) them.
Allows an SNMP management application using the string to get
object values on the switch but not to set them. The switch can use
the string to send notifications.
Allows the switch to use the string to send notifications.
Allows an SNMP management application using the string to get
and set object values on the switch.
Allows an SNMP management application using the string to get
and set object values on the switch. The switch also can use the
string to send notifications.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
IP Services Commands 133