Reset Ap; Set Ap Auto - Nortel 2300 Series Reference

reset ap

Restarts an AP.
Syntax
reset {ap port-list | ap ap-num}
ap port-list
ap ap-num
Defaults None.
Access Enabled.
Usage When you enter this command, the AP drops all sessions and reboots.
Caution!
with the AP.
Examples The following command resets the AP on port 7:
WSS# reset ap 7
This will reset specified AP devices. Would you like to continue? (y/n)y
success: rebooting ap attached to port 7

set ap auto

Creates a profile for automatic configuration of APs.
Syntax
set ap auto
Defaults None.
Access Enabled.
History
Version 4.0
Version 4.1
Version 5.0
Version 6.0
List of ports connected to the AP to restart.
Number of a AP to reset.
Restarting an AP can cause data loss for users who are currently associated
Command introduced.
Option persistent added.
• Option force-image-download added.
• Option radio num auto-tune min-client-rate
removed.
• Option radio num tx-pwr removed.
• Option dap removed.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
AP Commands 255