296 AP Commands
Examples The following command changes the beacon interval for radio profile rp1 to 200 ms:
WSS# set radio-profile rp1 beacon-interval 200
success: change accepted.
See Also
•
set radio-profile mode on page 291
•
show radio-profile on page 376
set radio-profile beaconed-ssid
See set service-profile beacon on page 310.
set radio-profile cipher-ccmp
See set service-profile cipher-ccmp on page 312.
set radio-profile cipher-tkip
See set service-profile cipher-tkip on page 313.
set radio-profile cipher-wep104
See set service-profile cipher-wep104 on page 314.
set radio-profile cipher-wep40
See set service-profile cipher-wep40 on page 315.
set radio-profile clear-ssid
See set service-profile ssid-name on page 331 and set service-profile ssid-type on page 332.
NN47250-100 (Version 02.51)