Nortel 2300 Series Reference page 311

Table 5: Defaults for Service Profile Parameters (continued)
Parameter
tkip-mc-time
transmit-rates
user-idle-timeout
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Default Value
60000
802.11a:
• mandatory:
6.0,12.0,24.0
• beacon-rate: 6.0
• multicast-rate:
auto
• disabled: none
802.11b:
• mandatory:
1.0,2.0
• beacon-rate: 2.0
• multicast-rate:
auto
• disabled: none
802.11g:
• mandatory:
1.0,2.0,5.5,11.0
• beacon-rate: 2.0
• multicast-rate:
auto
• disabled: none
180
Radio Behavior When
Parameter Set To
Default Value
Uses Michael countermeasures
for 60,000 ms (60 seconds)
following detection of a second
MIC failure within 60 seconds.
Accepts associations only from
clients that support one of the
mandatory rates.
Sends beacons at the specified
rate (6 Mbps for 802.11a, 2 Mbps
for 802.11b/g).
Sends multicast data at the highest
rate that can reach all clients
connected to the radio.
Accepts frames from clients at all
valid data rates. (No rates are
disabled by default.)
Allows a client to remain idle for
180 seconds (3 minutes) before
WSS Software changes the
client's session to the
Disassociated state.
AP Commands 311