Nortel 2300 Series Reference page 44

44 Port Commands
ap-num
serial-id serial-ID
model {2330 | 2330A | 2330B | 2332-A1
| 2332-A2 | 2332-A3 | 2332-A4 |
2332-A5 | 2332-A6 | 2332-E1 | 2332-E2 |
2332-E3 | 2332-E4 | 2332-E5 |2332-E6 |
2332-E7 | 2332-E8 | 2332-E9 | 2332-J1}
radiotype 11a | 11b | 11g
Defaults The default vales are the same as the defaults for the set port type ap command.
Access Enabled.
History
Version 4.1
Version 5.0.11
Version 6.0
Examples The following command configures apAP 1 for AP model AP-2330A with serial-ID
0322199999:
WSS# set ap 1 serial-id 0322199999 model 2330A
success: change accepted.
NN47250-100 (Version 02.51)
Number for the AP.
The range of valid connection numbers depends on the
WSS model:
• 2382—1 to 320
• 2380—1 to 300
• 2360/61—1 to 30
• 2350—1 to 8
AP serial ID. The serial ID is listed on the AP case. To
display the serial ID using the CLI, use the show
version details command.
AP model.
Radio type:
• 11a—802.11a
• 11b—802.11b
• 11g—802.11g
Note: This option applies only to single-radio models.
New values for model option added:
• 2330
• 2330A
New values for model option added:
• 2330B
Option dap removed
New value for model option added:
2332-A1, 2332-A2, 2332-A3, 2332-A4, 2332-A5, 2332-A6,
2332-E1, 2332-E2, 2332-E3, 2332-E4, 2332-E5, 2332-E6,
2332-E7, 2332-E8, 2332-E9, and 2332-J1.