Nortel 2300 Series Reference page 455

Table 5: show sessions network session-id Output
Field
Local Id
Global Id
State
State,
cont.
SSID
Port/Radio
MAC address
User Name
IP Address
Vlan Name
Description
Identifier for the session on this particular switch. (This is the session ID you
specify when entering the show sessions network session-id command.)
Unique session identifier within the Mobility Domain.
Status of the session:
• AUTH, ASSOC REQ—Client is being associated by the
802.1X protocol.
• AUTH AND ASSOC—Client is being associated by the 802.1X
protocol, and the user is being authenticated.
• AUTHORIZING—User has been authenticated (for example,
by the 802.1X protocol and an AAA method), and is entering
AAA authorization.
• AUTHORIZED—User has been authorized by an AAA
method.
• ACTIVE—User's AAA attributes have been applied, and the
user is active on the network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the WSS a disassociate message.
• User associated with one of the current WSS's APs has
appeared at another WSS in the Mobility Domain.
• ROAMING AWAY—The WSS has been sent a request to
transfer the user, who is roaming, to another WSS.
• STATUS UPDATED—WSS is receiving a final update from an
AP about the user, who has roamed away.
• WEB_AUTHING—User is being authenticated by Web-based
AAA.
• WIRED AUTH'ING—User is being authenticated by the
802.1X protocol on a wired authentication port.
• KILLING—User's session is being cleared, because of 802.1X
authentication failure, entry of a clear command, or some other
event.
Name of the SSID the user is on.
Number of the port and radio through which the user is accessing this session.
MAC address of the session user.
Name of the authenticated user of this session
IP address of the session user.
Name of the VLAN associated with the session.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Session Management Commands 455