Nortel 2300 Series Reference page 395

Table 24: Output for show service-profile (continued)
Field
WEP Key 3 value
WEP Key 4 value
WEP Unicast Index
WEP Multicast Index
Shared Key Auth
WPA enabled
or
RSN enabled
vlan-name, session-timeout,
service-type
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Description
State of static WEP key number 3:
• none—The key is not configured.
• preset—The key is configured.
State of static WEP key number 4:
• none—The key is not configured.
• preset—The key is configured.
Index of the static WEP key used to encrypt unicast traffic on an
encrypted SSID.
Index of the static WEP key used to encrypt multicast traffic on
an encrypted SSID.
Indicates whether shared-key authentication is enabled.
Indicates that the Wi-Fi Protected Access (WPA) or Robust
Security Network (RSN) information element (IE) is enabled.
Additional fields display the settings of other WPA or RSN
parameters:
• ciphers—Lists the cipher suites advertised by
radios in the radio profile mapped to this service
profile.
• authentication—Lists the authentication methods
supported for WPA or RSN clients:
• 802.1X—dynamic authentication
• PSK—preshared key authentication
• TKIP countermeasures time—Indicates the
amount of time (in ms) WSS Software enforces
countermeasures following a second message
integrity code (MIC) failure within a 60-second
period.
Note: These fields are displayed only when the WPA IE or
RSN IE is enabled.
These are examples of authorization attributes that are applied by
default to a user accessing the SSID managed by this service
profile (in addition to any attributes assigned to the user by a
RADIUS server or the local database).
Attributes are listed here only if they have been configured as
default attribute settings for the service profile.
See Table 29 on page 198
values that can be assigned to network users.
for a list of authorization attributes and
AP Commands 395