Show Crypto Key Domain; Show Crypto Key Ssh - Nortel 2300 Series Reference

See Also
• crypto generate self-signed on page 475
• show crypto ca-certificate on page 479

show crypto key domain

Displays the checksum (also called a fingerprint) of the public key used to authenticate management traffic between
WSSs.
Syntax
show crypto key domain
Defaults None.
Access Enabled.
History Introduced in WSS Software 5.0.
Examples To display the fingerprint for WSS-WSS security, type the following command:
WSS# show crypto key domain
Domain public key:
e6:43:91:e2:b3:53:ed:46:76:5f:f0:96:3a:3b:86:d3
See Also
crypto generate key on page 472

show crypto key ssh

Displays SSH authentication key information. This command displays the checksum (also called a fingerprint) of the
public key. When you connect to the WSS with an SSH client, you can compare the SSH key checksum displayed by the
WSS with the one displayed by the client to verify that you really are connected to the WSS and not another device.
Generally, SSH clients remember the encryption key after the first connection, so you need to check the key only once.
Syntax
show crypto key ssh
Defaults None.
Access Enabled.
History Introduced in WSS Software 2.0.
Examples To display SSH key information, type the following command:
WSS# show crypto key ssh
ec:6f:56:7f:d1:fd:c0:28:93:ae:a4:f9:7c:f5:13:04
See Also
crypto generate key on page 472
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Cryptography Commands 491