Nortel 2300 Series Reference page 581

show snoop info
Shows the configured snoop filters.
Syntax
show snoop filter-name
filter-name
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command shows the snoop filters configured in the examples above:
WSS# show snoop info
snoop1:
observer 10.10.30.2 snap-length 100
all packets
snoop2:
observer 10.10.30.3 snap-length 100
frame-type eq data
mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)
See Also
• clear snoop on page 565
• set snoop on page 567
show snoop map
Shows the AP radios that are mapped to a specific snoop filter.
Syntax
show snoop map filter-name
filter-name
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Usage To display the mappings for all snoop filters, use the show snoop command.
Examples The following command shows the mapping for snoop filter snoop1:
WSS# show snoop map snoop1
filter 'snoop1' mapping
Name of the snoop filter.
Name of the snoop filter.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Snoop Commands 581