Set Ip Dns Domain - Nortel 2300 Series Reference

124 IP Services Commands
Access Enabled.
Examples The following command enables DNS on a WSS:
WSS# set ip dns enable
Start DNS Client
See Also
• clear ip dns domain on page 100
• clear ip dns server on page 101
• set ip dns domain on page 114
• set ip dns server on page 115
• show ip dns on page 151

set ip dns domain

Configures a default domain name for DNS queries. The WSS appends the default domain name to domain names or
hostnames you enter in commands.
Syntax
set ip dns domain name
name Domain name of between 1 and 64 alphanumeric characters with no spaces (for
example, example.org).
Defaults None.
Access Enabled.
Usage To override the default domain name when entering a hostname in a CLI command, enter a period at
the end of the hostname. For example, if the default domain name is example.com, enter chris. if the fully
qualified hostname is chris and not chris.example.com.
Aliases take precedence over DNS. When you enter a hostname, WSS Software checks for an alias with that name first,
before using DNS to resolve the name.
Examples The following command configures the default domain name example.com:
WSS# set ip dns domain example.com
Domain name changed
See Also
• clear ip dns domain on page 100
• clear ip dns server on page 101
• set ip dns on page 113
• set ip dns server on page 115
• show ip dns on page 151
NN47250-100 (Version 02.51)