Ip Services Commands - Nortel 2300 Series Reference

IP Services Commands

Use IP services commands to configure and manage IP interfaces, management services, the Domain Name Service
(DNS), Network Time Protocol (NTP), and aliases, and to ping a host or trace a route. This chapter presents IP services
commands alphabetically. Use the following table to locate commands in this chapter based on their use.
IP Interface
System IP Address
IP Route
SSH Management
Telnet Management
HTTPS Management
DNS
IP Alias
set interface on page 109
set interface dhcp-client on page 110
set interface status on page 112
show interface on page 149
show dhcp-client on page 145
clear interface on page 99
set system ip-address on page 141
clear system ip-address on page 106
set ip route on page 116
show ip route on page 153
clear ip route on page 101
set ip ssh server on page 119
set ip ssh on page 118
set ip telnet on page 120
set ip telnet server on page 120
show ip telnet on page 155
clear ip telnet on page 102
set ip https server on page 116
show ip https on page 152
set ip dns on page 113
set ip dns domain on page 114
set ip dns server on page 115
show ip dns on page 151
clear ip dns domain on page 100
clear ip dns server on page 101
set ip alias on page 113
show ip alias on page 150
clear ip alias on page 100
Nortel WLAN—Security Switch 2300 Series Command Line Reference
107