Show Ap Counters - Nortel 2300 Series Reference

358 AP Commands
• show ap unconfigured on page 374
• show radio-profile on page 376

show ap counters

Displays AP and radio statistics counters.
Syntax
show ap counters [port-list [radio {1 | 2}]]
port-list
ap-num
radio 1
radio 2
Defaults None.
Access Enabled.
History
Version 4.0
Version 6.0
Usage To display statistics counters and other information for individual user sessions, use the show
sessions network command.
Examples The following command shows statistics counters for AP 7:
WSS# show ap counters 7
AP: 7
===================
LastPktXferRate
NumCntInPwrSave
LastPktRxSigStrength
LastPktSigNoiseRatio
TKIP Pkt Transfer Ct
NN47250-100 (Version 02.51)
List of ports connected to the AP(s) for which to display statistics
counters.
Number of a AP for which to display statistics counters.
Shows statistics counters for radio 1.
Shows statistics counters for radio 2. (This option does not apply to
single-radio models.)
New fields added:
• Radio Recv Phy Err Ct
• Transmit Retries
• Radio Adjusted Tx Pwr
• Noise Floor
• 802.3 Packet Tx Ct
• 802.3 Packet Rx Ct
• No Receive Descriptor
Option dap removed.
radio: 1
2 PktTxCount
0 MultiPktDrop
-89 MultiBytDrop
4 User Sessions
0 MIC Error Ct
73473
0
0
0
0