clear ip dns server
Removes a DNS server from a WSS configuration.
Syntax
clear ip dns server ip-addr
ip-addr
Defaults None.
Access Enabled.
Examples The following command removes DNS server 10.10.10.69 from a WSS's configuration:
WSS# clear ip dns server 10.10.10.69
success: change accepted.
See Also
•
clear ip dns domain on page 100
•
set ip dns on page 113
•
set ip dns domain on page 114
•
set ip dns server on page 115
•
show ip dns on page 151
clear ip route
Removes a route from the IP route table.
Syntax
clear ip route {default | ip-addr mask | ip-addr/mask-length} default-router
default
ip-addr mask
ip-addr/mask-length
default-router
Defaults None.
Access Enabled.
Examples The following command removes the route to destination 10.10.10.68/24 through router
10.10.10.1:
WSS# clear ip route 10.10.10.68/24 10.10.10.1
success: change accepted.
IP address of a DNS server.
Default route.
Note: default is an alias for IP address 0.0.0.0/0.
IP address and subnet mask for the route destination, in dotted
decimal notation (for example, 10.10.10.10 255.255.255.0).
IP address and subnet mask length in CIDR format (for example,
10.10.10.10/24).
IP address, DNS hostname, or alias of the next-hop router.
Nortel WLAN—Security Switch 2300 Series Command Line Reference
IP Services Commands 111