Nortel 2300 Series Reference page 372

372 AP Commands
Field
State
CPU info
Uptime
NN47250-100 (Version 02.51)
Table 13: Output for show ap status (continued)
Description
State of the AP:
• init—The AP has been recognized by the WSS
but has not yet begun booting.
• booting—The AP has asked the WSS for a boot
image.
• image downloading—The AP is receiving a boot
image from the WSS.
• image downloaded—The AP has received a boot
image from the WSS and is booting.
• configuring—The AP has booted and is ready to
receive or is already receiving configuration
parameters from the WSS.
• operational—The AP has received configuration
parameters for one or more radios and is ready to
accept client connections.
• configure failure—One or more of the radio
parameters received from the WSS is invalid.
For APs, this field also indicates whether the AP's management
traffic with the WSS is encrypted, and whether the AP's
fingerprint has been verified on the WSS:
• not encrypted—The management session is not
encrypted.
• encrypted but fingerprint not verified—The AP's
management traffic is encrypted, but the AP's
fingerprint has not been verified in WSS
Software.
• encrypted and verified—The AP's management
traffic is encrypted and the AP's fingerprint has
been verified in WSS Software.
Specifications and identification of the CPU.
For AP models other than AP-1xx or AP-2xx, the ID portion of
this field is not applicable.
Amount of time since the AP booted using this link.