Nortel 2300 Series Reference page 582

582 Snoop Commands
ap: 3
See Also
• clear snoop map on page 566
• set snoop map on page 568
• show snoop on page 570
show snoop stats
Displays statistics for enabled snoop filters.
Examples show snoop stats [filter-name [ap-num [radio {1 | 2}]]]
filter-name
ap ap-num
radio 1
radio 2
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Usage The AP retains statistics for a snoop filter until the filter is changed or disabled. The AP then clears
the statistics.
Examples The following command shows statistics for snoop filter snoop1:
WSS# show snoop stats snoop1
Filter ap Radio Rx Match
===============================================================================
snoop1 3 1
NN47250-100 (Version 02.51)
Radio: 2
Name of the snoop filter.
Number of a AP to which the snoop filter is mapped.
Radio 1 of the AP.
Radio 2 of the AP. (This option does not apply to single-radio models.)
Tx Match Dropped
96 4 0 stopped
Stop-After