Set Service-Profile Soda Remediation-Acl; Set Service-Profile Soda Success-Page - Nortel 2300 Series Reference
Wlan security switch command line reference
Hide thumbs
Also See for 2300 Series:
- Configuration manual (658 pages) ,
- Solution manual (108 pages) ,
- Installation and configuration manual (66 pages)
Table of Contents
Advertisement
340 AP Commands
set service-profile soda remediation-acl
Specifies an ACL to be applied to a client if it fails the checks performed by the SODA agent.
Syntax
set service-profile name soda remediation-acl acl-name
name
acl-name
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.1.
Usage If the SODA agent checks fail on a client, by default the client is disconnected from the network.
Optionally, you can specify a failure page for the client to load (with the set service-profile soda failure-page
command). When the failure page is loaded, you can optionally specify a remediation ACL to apply to the
client. The remediation ACL can be used to grant the client limited access to network resources, for example.
If there is no remediation ACL configured, then the client is disconnected from the network when the failure
page is loaded.
This functionality occurs only when the enforce checks option is enabled for the service profile. The enforce checks
option is enabled by default.
Examples The following command configures the WSS to apply acl-1 to a client when it loads the failure
page:
WSS# set service-profile sp1 soda remediation-acl acl-1
success: change accepted.
See Also
•
set service-profile soda enforce-checks on page 326
•
set service-profile soda failure-page on page 327
•
show service-profile on page 380
set service-profile soda success-page
Specifies a page on the WSS that is loaded when a client passes the security checks performed by the SODA agent.
Syntax
set service-profile name soda success-page page
name
page
Defaults By default, the WSS generates a page indicating that the client passed the SODA agent checks.
NN47250-100 (Version 02.51)
Service profile name.
Name of an existing security ACL to use as a remediation ACL for this
service profile. ACL names must start with a letter and are case-
insensitive.
Service profile name.
Page that is loaded if the client passes the security checks performed by
the SODA agent.
Advertisement
Table of Contents
