58 Port Commands
See Also
•
clear port-group on page 25
•
set port-group on page 35
show port media-type
Displays the enabled interface types on a 2380 switch's gigabit Ethernet ports.
Syntax
show port media-type [port-list]
port-list
Defaults None.
Access All.
History Introduced in WSS Software Version 4.0.
Usage This command applies only to the 2380.
Examples The following command displays the enabled interface types on all four ports of an
2380 switch:
2380# show port media-type
Port Media Type
===========================================================
1 GBIC
2 RJ45
3 GBIC
4 GBIC
Table 7
describes the fields in this display.
Field
Port
Preference
See Also
•
clear port media-type on page 25
•
set port media-type on page 36
NN47250-100 (Version 02.51)
List of physical ports. WSS Software displays the enabled interface types
for all the specified ports.
Table 7: Output for show port media-type
Description
Port number.
Preference setting:
• GBIC—The GBIC (fiber) interface is enabled.
• RJ45—The RJ-45 (copper) interface is enabled.