Lan Interface Leds; Verifying A Successful Installation; Figure 4-4. Lan Port And Interface Leds; Figure 4-5. Diagnostic Leds - Nortel Passport 2430 Installing And Operating Instructions
Multiservice access switch
Hide thumbs
Also See for Passport 2430:
- Reference manual (252 pages) ,
- Product support bulletin (3 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
Installing and Operating the Passport 2430 Multiservice Access Switch
LAN Interface LEDs
The LAN interface LEDs are on the bottom left and right corners of the LAN port,
which is labeled 10/100.
Link
Figure 4-4.
The Link LED lights when you establish an Ethernet connection.
The TX/RX LED lights when data passes to or from the router.
Verifying a Successful Installation
After connecting the Passport 2430 to the network, you can verify a successful
installation by checking the diagnostic LEDs on the back panel of the Passport
2430
Run
Boot
Fail
VLK0021A
Figure 4-5.
4-4
10/100
TX/RX
VLK0032A
LAN Port and Interface LEDs
(Figure
4-5).
Diagnostic LEDs
308224-B Rev 00
Advertisement
Table of Contents
