Fabric card NTHR16EA
The following have been updated for this feature:
•
the table
pre-NTHR16EA (page 76)
•
the table
NTHR16EA (page 77)
•
the section
•
the section
Recurring fan alarm
The following sections were updated for this feature:
•
Hardware alarm definitions and behaviors (page 48)
•
Fabric replacement can affect system cooling (page 84)
•
Alarm/BITS module (page 93)
•
Status LEDs of a BIP alarm module (page 290)
•
The impact of heat dissipation on rising shelf temperatures (page 109)
CP support and CP/VPNXc warm standby equipment protection
The following section was updated for this feature:
•
VpnXc sparing (page 225)
Voice services processor 3 with optical TDM interface
(2pOC3ChSmIrVsp3)
The following section was updated for this feature.
•
VSP3-o FP line connections (page 236)
Related documents
See the following documents for related information:
•
NN10600-001 Nortel Networks Multiservice Switch 7400/15000/20000
About the Documentation
•
NN10600-002 Nortel Networks Using Task-based Documentation Job Aid
•
NN10600-005 Nortel Networks Multiservice Switch 7400/15000/20000
Terminology
•
NN10600-030 Nortel Networks Multiservice Switch 7400/15000/20000
Overview
•
NN10600-125 Nortel Networks Multiservice Switch 15000/20000
Planning Site Requirements
Copyright © 2005, Nortel Networks
- 13 -
About this document
Features of a 40 Gbit/s Multiservice Switch 15000 fabric card
Features of a 40 Gbit/s Multiservice Switch 15000 fabric card
Fabric replacement can affect system cooling (page 84)
Fabric replacement may require a software patch (page 86)
Nortel Networks Multiservice Switch 15000/20000
Hardware Description
NN10600-120 sPCR6.1S1 Standard
sPCR6.1 February 2005
Nortel Networks Confidential